csen

TBUS8-25,0-7P1S

ADiS4 - Modular Control System

Thanks to its design, the ADiS4 modular control system offers considerable modularity and flexibility for even the most demanding applications. The core of the system is the original two-bus communication between the CPU and the individual modules, which allows up to 64 expansion modules to be connected to a single assembly, with up to 16 signals per module. The speed of operation of digital inputs or outputs in the maximum assembly reaches 2 ms. The mechanical design with a unique modular backplane built directly into the 35 mm DIN rail connecting the individual modules of the system is also worth mentioning. Adding another module, replacing it or removing it from the assembly is extremely simple. The entire mechanical concept is based on Phoenix Contact's proven mechanical solutions. Each expansion module can be removed from the assembly individually, without the need to disassemble the entire assembly. The input/output terminals on the modules use the Push-in technology, which allows the wires to be plugged into the terminals with one hand without the use of any tools. This leads to reduced assembly times of up to half compared to conventional screw or spring clamps. All expansion modules indicate the status of the bus and, in the case of digital signals, their status by means of LEDs. The ADiS4 modular system is ready for the gradual addition of a portfolio of CPU units and expansion modules. The CPU units have an Ethernet interface as standard in the switch version and two slots for additional communication buses, which are configured from the factory. The operating temperature of the ADiS4 system is normally between -40 and 70 °C. The ADiS4 belongs to the new generation of AMiT systems and therefore supports, among other things, advanced communications and security for data exchange with higher-level systems. Support for integrated web-based visualization directly in the control system is a standard feature.  
  • modulární sestava systému s modulárním backplane
  • montáž na DIN lištu 35 mm
  • připojení až 64 V/V rozšiřujících modulů v jedné sestavě
  • Push-in svorky
  • integrovaná webová vizualizace a webserver
  • 2× Ethernet 10/100 Mbps, switch
  • až 2 další komunikační rozhraní (RS485, RS232, CAN) na CPU
  • slot pro micro SD kartu
  • programování a ladění – DetStudio
Procesor
STM32F437
Paměť
1MB + 16 MB RAM
2MB + 16 MB FLASH
EEPROM 32 KB
Slot pro paměťovou kartu
Micro SD
Webserver
Ano
Komunikační kanály
1× Ethernet 10 / 100 Mbps
2× slot pro RS485/RS232/CAN (osazeno z výroby)
Počet vstupně/výstupních modulů
64
Připojení na systémovou sběrnici
TBUS8
Krytí
IP20
Napájení
19,2 V ss. až 28,8 V ss.
Pracovní teplota
-40 °C až 70 °C
Rozměry (š × v × h)
(117,6 × 50,1 × 116,6) mm
Montáž
Na 35 mm lištu
Generace systému
Gen2 E+
AD4-CPS/01
2× Ethernet, SD karta, integrovaný webserver
AD4-CPS/02
2× Ethernet, 1× RS485 (galv. oddělení), 1× RS232, SD karta, integrovaný webserver
AD4-DI16
16× číslicových vstupů 24V ss./st., galvanicky dddělené
AD4-DO16
16× číslicových výstupů 24V ss./ 0,3 A, MOS výstup, galvanicky oddělené
AD4-RDO06
6× reléových výstupů 250V st./ 4 A
AD4-AI08
8× analogových vstupů U/I/RTD/NTC/24V vstup, galvanicky oddělené, 15 bitů
AD4-AO08U
8× analogových výstupů 0..10V, galvanicky oddělené, 12 bitů
AD4-AO08I
8× analogových výstupů 0..20mA, galvanicky oddělené, 12 bitů
Kategorie:

Other Related Products

Contractual partners only
  • modulární sestava systému s modulárním backplane
  • montáž na DIN lištu 35 mm
  • připojení až 64 V/V rozšiřujících modulů v jedné sestavě
  • Push-in svorky
  • integrovaná webová vizualizace a webserver
  • 2× Ethernet 10/100 Mbps, switch
  • až 2 další komunikační rozhraní (RS485, RS232, CAN) na CPU
  • slot pro micro SD kartu
  • programování a ladění – DetStudio
Procesor
STM32F437
Paměť
1MB + 16 MB RAM
2MB + 16 MB FLASH
EEPROM 32 KB
Slot pro paměťovou kartu
Micro SD
Webserver
Ano
Komunikační kanály
1× Ethernet 10 / 100 Mbps
2× slot pro RS485/RS232/CAN (osazeno z výroby)
Počet vstupně/výstupních modulů
64
Připojení na systémovou sběrnici
TBUS8
Krytí
IP20
Napájení
19,2 V ss. až 28,8 V ss.
Pracovní teplota
-40 °C až 70 °C
Rozměry (š × v × h)
(117,6 × 50,1 × 116,6) mm
Montáž
Na 35 mm lištu
Generace systému
Gen2 E+
AD4-CPS/01
2× Ethernet, SD karta, integrovaný webserver
AD4-CPS/02
2× Ethernet, 1× RS485 (galv. oddělení), 1× RS232, SD karta, integrovaný webserver
AD4-DI16
16× číslicových vstupů 24V ss./st., galvanicky dddělené
AD4-DO16
16× číslicových výstupů 24V ss./ 0,3 A, MOS výstup, galvanicky oddělené
AD4-RDO06
6× reléových výstupů 250V st./ 4 A
AD4-AI08
8× analogových vstupů U/I/RTD/NTC/24V vstup, galvanicky oddělené, 15 bitů
AD4-AO08U
8× analogových výstupů 0..10V, galvanicky oddělené, 12 bitů
AD4-AO08I
8× analogových výstupů 0..20mA, galvanicky oddělené, 12 bitů
Kategorie:

Other Related Products

Didn't find what you were looking for?

Contact us.
CALL US
  • +420 541 217 220
Or write to us and we will get back to you.
  • Obchodní oddělení
  • Technická podpora
  • Servis/Reklamace
  • Webmaster

AMiT Automation s.r.o.

  • info@amit-automation.cz
  • +420 541 217 220
    +420 549 210 403
    +420 549 210 276

Vídeňská 186/118


619 00 Brno


Česká republika

IČO: 276 52 203


DIČ: CZ27652203

MODERNÍ ELEKTRONIKA PRO PRŮMYSLOVOU AUTOMATIZACI A AUTOMATIZACI BUDOV

Copyright © — AMiT Automation
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.
Přihlášení a registrace
Registrací souhlasíte s našimi obchodními podmínkami a se zpracováním osobních údajů.

We often send out our newsletter with news and great offers. We will never disclose your data to third parties and you can unsubscribe from the newsletter at any time.

Unfortunately, we’re unable to offer free samples. As a retailer, we buy all magazines from their publishers at the regular trade price. However, you could contact the magazine’s publisher directly to ask if they can send you a free copy.

You can create a new account at the end of the order process or on the following page. You can view all of your orders and subscriptions in your customer account. You can also change your addresses and your password.

No, you don’t have to create an account. But there are a few advantages if you create an account.

  • You never have to enter your billing and shipping address again

  • Find all of your orders, subscriptions and addresses in your account

  • Download invoices of your orders

No, we don’t have a physical store location at the moment. We accept only orders through our online shop and we’re shipping all orders with the Swiss Post Service. Please visit our shipping section for more details.

From time to time you will find us at design fairs and popup markets in Switzerland. Subscribe to our newsletter and you’ll receive the latest news.

Tab Content

This is a basic text element.
Smazat účet?
Určitě si přejete smazat účet?

Tuto akci nelze vrátit zpět.
Přihlášení a registrace

Pro zobrazení tohoto formuláře se musíte přihlásit.

Zapomenuté heslo

Zadejte svůj e-mail, na který vám zašleme odkaz pro obnovení hesla.

Přihlášení a registrace
Registrací souhlasíte s našimi obchodními podmínkami a se zpracováním osobních údajů.

We often send out our newsletter with news and great offers. We will never disclose your data to third parties and you can unsubscribe from the newsletter at any time.

Unfortunately, we’re unable to offer free samples. As a retailer, we buy all magazines from their publishers at the regular trade price. However, you could contact the magazine’s publisher directly to ask if they can send you a free copy.

You can create a new account at the end of the order process or on the following page. You can view all of your orders and subscriptions in your customer account. You can also change your addresses and your password.

No, you don’t have to create an account. But there are a few advantages if you create an account.

  • You never have to enter your billing and shipping address again

  • Find all of your orders, subscriptions and addresses in your account

  • Download invoices of your orders

No, we don’t have a physical store location at the moment. We accept only orders through our online shop and we’re shipping all orders with the Swiss Post Service. Please visit our shipping section for more details.

From time to time you will find us at design fairs and popup markets in Switzerland. Subscribe to our newsletter and you’ll receive the latest news.

Tab Content

This is a basic text element.
Přidat do seznamu
+ Přidat nový seznam