csen

AMRIO-DI24

AMRIO – Remote Input/Output Modules

The AMRIO series input/output extension modules are used to easily extend I/O signals of control systems. Modules from this series feature both ARION and MODBUS RTU communication protocols – the selection of the required protocol is done with a flip of a switch. In setups with both AMiT systems and systems developed by different manufacturers, it is appropriate to use the MODBUS protocol. The I/O modules on offer either support a single type of I/O signal or a combination of signals. In terms of installation, modules mount onto a 35 mm DIN rail, require 24 V DC and are operable in a temperature range of -20 to 70 °C. The AMRIO series replaces previous module series – DM-xx (ARION protocol) and DMM-xx (MODBUS RTU protocol).

Overview of I/O extension modules

AMRIO-DI24 24× digital input 24 V DC, galvanically isolated
AMRIO-DO21 21× digital output 24 V DC, 300 mA, galvanically isolated
AMRIO-RDO12 12× switching relay 250 V / 4 A
AMRIO-AI12 12× analogue input*), 12 bits
AMRIO-AO8I 8× analogue output 0 V to 20 mA, 12-bit resolution
AMRIO-AI8DO8 8× analogue input*), 8× digital output 24 V DC, 300 mA
AMRIO-AI8RDO8 8× analogue input*), 8× switching relay 230 V AC / 24 V DC / 2 A
AMRIO-AI8AO8U 8× analogue input*), 8× analogue output 0 V to 10 V, 12-bit resolution
*) 0 to 5 V / 0 to 10 V / 0 to 20 mA / RTD / dry contact / digital input 24 V DC
  • intelligent extension I/O modules based on ARION and MODBUS RTU communication
  • up to 63 modules connected to a single control system at once
  • extending the control system by up to 1,512 digital or 756 analogue inputs
  • system support in all AMiT control systems
  • detection of communication failures
  • public communication protocol ARION
  • supported parametrisation in the DetStudio development environment
Communication line
RS485
Galvanic isolation of the line
Yes
Communication speed
9600 Bd to 115200 Bd
Number of modules on the RS485 network
Max. 63
Power supply
19,2 V ss. to 28,8 V ss.
Subscription
Depending on the type, 24 mA to 150 mA
Connection of signals
WAGO spring connectors
Cover
IP20
Working temperature
-20 °C ato 70 °C
Construction
DIN rail 35 mm
Dimensions (w x h x d)
(106 × 101 × 62) mm
Programming
DetStudio/EsiDet
System generation
Gen2 R

Other Related Products

Contractual partners only
  • intelligent extension I/O modules based on ARION and MODBUS RTU communication
  • up to 63 modules connected to a single control system at once
  • extending the control system by up to 1,512 digital or 756 analogue inputs
  • system support in all AMiT control systems
  • detection of communication failures
  • public communication protocol ARION
  • supported parametrisation in the DetStudio development environment
Communication line
RS485
Galvanic isolation of the line
Yes
Communication speed
9600 Bd to 115200 Bd
Number of modules on the RS485 network
Max. 63
Power supply
19,2 V ss. to 28,8 V ss.
Subscription
Depending on the type, 24 mA to 150 mA
Connection of signals
WAGO spring connectors
Cover
IP20
Working temperature
-20 °C ato 70 °C
Construction
DIN rail 35 mm
Dimensions (w x h x d)
(106 × 101 × 62) mm
Programming
DetStudio/EsiDet
System generation
Gen2 R

Other Related Products

Didn't find what you were looking for?

Contact us.
CALL US
  • +420 541 217 220
Or write to us and we will get back to you.
  • Obchodní oddělení
  • Technická podpora
  • Servis/Reklamace
  • Webmaster

AMiT Automation s.r.o.

  • info@amit-automation.cz
  • +420 541 217 220
    +420 549 210 403
    +420 549 210 276

Vídeňská 186/118


619 00 Brno


Česká republika

IČO: 276 52 203


DIČ: CZ27652203

MODERNÍ ELEKTRONIKA PRO PRŮMYSLOVOU AUTOMATIZACI A AUTOMATIZACI BUDOV

Copyright © — AMiT Automation
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.
Přihlášení a registrace
Registrací souhlasíte s našimi obchodními podmínkami a se zpracováním osobních údajů.

We often send out our newsletter with news and great offers. We will never disclose your data to third parties and you can unsubscribe from the newsletter at any time.

Unfortunately, we’re unable to offer free samples. As a retailer, we buy all magazines from their publishers at the regular trade price. However, you could contact the magazine’s publisher directly to ask if they can send you a free copy.

You can create a new account at the end of the order process or on the following page. You can view all of your orders and subscriptions in your customer account. You can also change your addresses and your password.

No, you don’t have to create an account. But there are a few advantages if you create an account.

  • You never have to enter your billing and shipping address again

  • Find all of your orders, subscriptions and addresses in your account

  • Download invoices of your orders

No, we don’t have a physical store location at the moment. We accept only orders through our online shop and we’re shipping all orders with the Swiss Post Service. Please visit our shipping section for more details.

From time to time you will find us at design fairs and popup markets in Switzerland. Subscribe to our newsletter and you’ll receive the latest news.

Tab Content

This is a basic text element.
Smazat účet?
Určitě si přejete smazat účet?

Tuto akci nelze vrátit zpět.
Přihlášení a registrace

Pro zobrazení tohoto formuláře se musíte přihlásit.

Zapomenuté heslo

Zadejte svůj e-mail, na který vám zašleme odkaz pro obnovení hesla.

Přihlášení a registrace
Registrací souhlasíte s našimi obchodními podmínkami a se zpracováním osobních údajů.

We often send out our newsletter with news and great offers. We will never disclose your data to third parties and you can unsubscribe from the newsletter at any time.

Unfortunately, we’re unable to offer free samples. As a retailer, we buy all magazines from their publishers at the regular trade price. However, you could contact the magazine’s publisher directly to ask if they can send you a free copy.

You can create a new account at the end of the order process or on the following page. You can view all of your orders and subscriptions in your customer account. You can also change your addresses and your password.

No, you don’t have to create an account. But there are a few advantages if you create an account.

  • You never have to enter your billing and shipping address again

  • Find all of your orders, subscriptions and addresses in your account

  • Download invoices of your orders

No, we don’t have a physical store location at the moment. We accept only orders through our online shop and we’re shipping all orders with the Swiss Post Service. Please visit our shipping section for more details.

From time to time you will find us at design fairs and popup markets in Switzerland. Subscribe to our newsletter and you’ll receive the latest news.

Tab Content

This is a basic text element.
Přidat do seznamu
+ Přidat nový seznam